Job Stories

This homeowner in Allenhurst, NJ, owns a stunning early 1900s home. During our attic inspection, we observed inadequate insulation and a lack of proper air sealing—a common issue in both older and newer homes. Despite the seemingly good condition of the ductwork, if there's insufficient air sealing or insulation, conditioned air can escape into the attic, leading to increased energy expenses and decreased comfort. By utilizing ZypFoam sealant for air sealing and adding TruSoft cellulose insulation to achieve the recommended R-Value of R-60, we can significantly enhance the comfort and energy efficiency of this home.

Upon entering the crawl space in Allenhurst, NJ, we immediately detected high moisture levels. The exposed walls lacked insulation, with visible deterioration of fiberglass and wood. We found standing water, a struggling sump pump, and leaking ductwork throughout the space. These issues compromise indoor air quality by allowing crawl space air into the duct system, which circulates back into the home's conditioned spaces. Additionally, conditioned air escapes into the crawl space, leading to temperature inconsistencies. Evidence of dry rot in wooden beams further underscored the moisture and temperature fluctuations. Our proposed solutions include replacing the sump pump, insulating walls with SilverGlo Foam Boards, spray foaming rim joists, encapsulating the floor with CleanSpace liner, and mastic sealing or encapsulating ducts as needed. These measures aim to enhance comfort, energy efficiency, indoor air quality, and overall home integrity for the homeowner.

This homeowner in Allenhurst, NJ, experienced discomfort due to conditioned air escaping through leaky can lights and an attic that was not properly air sealed. The insufficient insulation and air leaks were driving up energy costs and reducing comfort. By air sealing the attic, installing can light covers over the can lights, and adding R-60 cellulose insulation, we can help lower the homeowner's energy bills and improve overall comfort.

After inspecting the crawl space in Ocean Grove, NJ, we discovered condensation forming on the pipes and dripping onto surrounding surfaces. High relative humidity can lead to the formation of condensation, which encourages mold growth on organic materials. This mold can release spores and odors, potentially compromising indoor air quality and leading to dry rot that damages the wood structure in the crawl space. To address this, we recommend installing a Sedona dehumidifier. This solution effectively reduces humidity levels, dries out the crawl space, and helps maintain comfort throughout the rest of the house.

This home in Deal, NJ feels uncomfortable and drafty due to insufficient insulation. Visible bare spots reveal areas where the attic lacks proper coverage. To make matters worse, the attic isn't air-sealed, which further increases the homeowner’s discomfort. By sealing the attic and adding cellulose insulation with an optimal R-value of R-60, we can significantly enhance comfort and energy efficiency in this home—and any home.

This homeowner in Long Branch, NJ needed our help air sealing their attic. First we pull back some of the fiberglass insulation to check for gaps or holes in the attic floor. Our experts are always searching for cracks, gaps and holes in the attic floor. When fiberglass insulation becomes dirty that can be a sign of air leaking from these cracks, holes and gaps. So when an attic is not air sealed we have hot or cold air circulating into these cracks, holes, gaps and soffits. This can create the rooms below to become drafty, cold and hot. Before we blow-in our TruSoft cellulose insulation we must air seal the attic first. Once we air seal and insulate the attic, the customer will have a more comfortable house, lower fuel and electric bills.

We are visiting a homeowner in Long Branch, NJ that has complained about their upstairs bedrooms being too cold. After inspecting the attic our team noticed the attic was poorly insulated. Our team also found some flexible ducts that were loosely connected. We also found the attic was not air sealed and the fiberglass insulation did next to nothing to insulate. Before we insulate the attic, our team will reconnect any loose ducts and properly air seal the seams. Next we use our orange ZypFoam sealant to air seal the attic floors. After the attic is air sealed the team will start building catwalks and decking to help contain the insulation we blow-in. Once the decking and catwalk is in place our team blows-in our TruSoft cellulose insulation into the attic. Finally, we will install a Scuttle Hatch Cover over the entrance of the attic while we air seal the hatch to create an air sealed cover. This customer now has a more comfortable house, lower fuel and electric bills.

During a free Energy Audit in Long Branch, NJ, we found an attic with poor ventilation and insulation, causing moisture buildup, mold, and potential dry rot on the roof rafters. The soffits were blocked by fiberglass bats without vent baffles for proper airflow. If not addressed, these issues will continue, leading to an uncomfortable home, wasted energy, and possible roof damage. Mold can also harm indoor air quality and health. Our team specializes in building science to improve your home's comfort, energy efficiency, and health. We treat mold with stain removers and botanicals to help prevent its return, though we cannot guarantee it won't grow back. Identifying and addressing the underlying cause is key to preventing future mold growth.

In Long Branch, NJ, we're examining an outdated vented crawl space that exhibits signs of moisture and air leaks through porous cinder block walls, vents, and exposed rim joists. These leaks allow unwanted air to enter the home, causing discomfort for the homeowner. Additionally, the floor shows signs of moisture staining. We can address these problems by sealing the crawl space vents using SilverGlo foam board and filling any gaps with spray foam. Insulating walls with SilverGlo and applying a CleanSpace liner on the floor will reduce gases and moisture. Finally, we'll spray foam rim joists to prevent leaks, enhancing comfort, indoor air quality, and energy efficiency.

During our free home evaluation in Long Branch, NJ, we inspected the homeowner’s crawl space and found several insulation problems contributing to discomfort and higher energy bills. A large, unsealed window was allowing outside air to leak into the space, while the porous brick walls were letting in cold, damp air, making the area humid or cold. Additionally, the dirt floor was allowing moisture to rise, increasing humidity and the risk of mold growth. We also found that the rim joists near the foundation were leaking outside air. If your crawl space has similar issues and you're concerned about comfort, energy efficiency, or indoor air quality, contact us today.