Dependable Home Energy Saving Company Serving Lincroft, NJ

A homeowner in Lincroft, NJ, recently had us conduct an energy audit. During the inspection, we discovered exposed, porous walls and poorly insulated crawl vents in the crawl space, which allowed outside air and moisture to enter. To address this, we'll install SilverGlo foam boards along the interior of the exterior walls, also using them to block the vents. We will then apply spray foam to seal any remaining gaps and ensure the rim joists are fully sealed. These measures will make the home more comfortable and energy efficient.

A homeowner in Lincroft, NJ has a home that was built in 1952 with old fiberglass insulation. When inspecting further into the attic our team found gaps and holes between the floor and framing of the attic. These gaps and holes create unwanted air from leaking or seeping in and out of the attic. The old fiberglass insulation builds up dirt in the fiberglass and never insulates or does next to nothing to insulate the attic. When dirt builds up into the fiberglass insulation it circulates into the attic and throughout the house. Also the poorly insulated attic Kneewalls are causing the adjoining rooms to become cold and drafty. Our solution for this customer was to remove the old fiberglass insulation. After the removal of the fiberglass insulation, we used our orange ZypFoam sealant to seal the gaps and holes of the attic floor. By air sealing the attic we have eliminated the cold and drafty rooms below. Next our team works on spray foaming the rim joists to eliminate unwanted air from leaking or seeping into and out of the attic. We have to address the attics Kneewall and staircase that joins the connecting room. The Kneewall and staircase is poorly insulated which causes more cold drafty rooms. Without the proper insulation these rooms will leak unwanted cool air or hot air making them uncomfortable. Our team installs our SilverGlo insulation panels onto the Kneewall and around the staircase walls in the attic. Graphite is infused into our SilverGlo foam insulation panels that bump up the insulation value by 24% over the standard EPS foam. Next our crew uses our orange ZypFoam sealant to seal the seams of the gaps of the SilverGlo Insulation panels. Finally our team blows-in our TruSoft Cellulose insulation (has an R-Value of R60) into the joist bays to complete the attics insulation. This attic is now properly insulated and air sealed. These images are all after the completion of air sealing the attic and insulating the Kneewall. Our TruSoft Cellulose insulation is not shown in these pictures just to show our customers what's involved in air sealing the attic and insulating the Kneewall. Our customer now enjoys a less drafty house, a more comfortable home, rooms easier to heat, lower fuel and electric bills.